Owner
- Extends the use of shingles that still lie flat.
- Flashing and nail repairs are folded into one job.
- An honest call when the roof is past coating.
As a Fort Wayne shingle roof coating contractor, we coat aged asphalt shingles on offices, clinics, churches, and retail strips while they still lie flat.


Fort Wayne shingle roof coating works only inside a narrow window. These lists show which side of it your roof sits on.
These are the shingle conditions we sort before any coating is sold.
Some granule loss is normal with age. Heavy piles in the gutters and bare black patches on the tabs tell us how close the roof is to the end.
Water inside along a wall usually comes from step or counter flashing. That flashing is repaired first, since coating cannot seal it.
Unsealed tabs flap in wind and crack at the nail line. Loose tabs are sealed down and broken ones replaced.
Tabs that crack when bent have lost their oils. A shingle coating soaks in and slows that drying while they still lie flat.
Raised nails punch holes in the row above. They are reset or replaced and sealed before coating.
A spongy feel underfoot near a valley means rotten decking. That section is opened and replaced first.
Shingle roofs on commercial buildings end up on one of these four paths after the walk.
| Path | Shingle Condition | Work Done | Next Step |
|---|---|---|---|
| Coat Now | Dry, flat, sealed down | Clean, repair flashing, apply shingle coating | Check again in a few years |
| Repair Then Coat | Mostly flat, a few broken tabs | Replace tabs, reset nails, then coat | Same as above |
| Coat The Mansard Only | Flat roof plus a shingled front band | Coat the shingle band, other system on the flat roof | Two systems on one building |
| Reshingle | Curled, missing, or two layers | No coating; we tell you why on the roof | New roof by the right contractor |
A shingle coating helps only while the shingles are still worth keeping, and each group gains something from that.
Call and tell us how the gutters look after a rain. Granule piles help us judge whether coating still makes sense.
(260) 620-8962The checks come before the coating. Here is the order we follow on every shingle roof.
We check tab flatness, granule loss, nail pops, and deck firmness across each roof face, and count layers at the edge.
Wall and chimney flashing is repaired, broken tabs replaced, popped nails reset, and soft decking opened and replaced.
Moss, dirt, and debris are cleaned off at low pressure so the shingle surface is not scoured.
A breathable coating made for asphalt is sprayed at the maker's rate so it soaks in rather than forming a thick skin.
Coverage is checked on every face, gutters are cleared, and the finished surface is photographed for your records.
Many shingled buildings have another roof type somewhere on the property.

Metal warehouse or shop roofs on the same property get the full metal coating system.
Low-slope roofs behind a shingled mansard front often take silicone.

Pitched metal canopies and porches take a lower-cost acrylic coat.

Flat roofs that need insulation and slope can take foam.
What owners ask about coating an asphalt shingle roof.
On offices, clinics, churches, and retail strips with asphalt shingles that are worn but still flat and attached. The coating seals the surface and slows drying and cracking. Curled, missing, or soft-decked areas get repaired or replaced before any coating goes on.
Coating fits aged shingles that still lie flat and stay sealed on a solid deck. Reshingling fits curling, cracked, or missing tabs, or a roof that already has two layers. We check granule loss, nail pops, and deck softness, and say so plainly when the roof is past coating.
A breathable product made for asphalt that soaks into the shingle surface, so trapped moisture can still escape. Thick elastomeric coatings made for metal or flat roofs belong on those roofs instead. We follow the shingle coating maker for cleaning, weather, and rate.
Within limits. It can refresh brittle shingles, help them shed water, and slow granule loss. It will not reattach loose tabs, stop a flashing leak, or bring back shingles at the end of their life, so those repairs come first.
Yes. Many retail and office buildings have a shingled mansard band in front of a flat roof. The shingles take a shingle coating, and the flat roof behind gets silicone or another system that fits it.
Tell us the building type and what the shingles look like. We will check the deck and flashing and tell you whether coating fits.